Cisco CCNA 100-101 & 200-101 – Interconnecting Cisco Networking Devices

The Cisco CCNA Training Package (ICND v2: Parts 1 and 2) includes expert instructor-led training modules with customized presentations, practice exam simulators and learning supplements for an all-inclusive training program that provides all the benefits of classroom training at your own pace.

The new Interconnecting Cisco Networking Devices Part 1 & 2 (ICND1 v2 & ICND2 v2) course provides students with the knowledge and skills needed to install, operate and troubleshoot a small to medium branch network.

The new ICND1 & ICND2 course curriculum includes LAN Switching Technologies, Troubleshooting, WAN Technologies and IP Services (SNMP, Syslog, FHRP). The curriculum also includes the Operation of IP Data Networks, IP Addressing (IPv4 & IPv6), Network Security, Basic Troubleshooting and DHCP, NAT, ACLs and other IP Routing Technologies.

The new and updated ICND1 v2 and ICND2 v2 courses provide students with network infrastructure know how. The CCNA certification help build the necessary foundational knowledge required for job roles such as network engineer, network specialist or network administrator.

The ICND1 & ICND2 course curriculum includes Cisco switches, routers, basic migration of security threats, introduction to wireless networking concepts. In addition, the course provides the necessary knowledge and skills required for the following protocols: IP, OSPF, ACLs (Ethernet and Access Control Lists), VLANs, Frame Relay, Serial Line Interface Protocol and EIGRP (Enhanced Interior Gateway Routing Protocol.

ICND1
Course content added to the new version:

• Implementing VLSM
• Configuring IPv6
• Understanding IPv6
• Basic IPv6
• Implementing single area OSPF
• Scaling the Network with NAT and PAT
• Routing between VLANs
• Managing Traffic using ACLs
• Implementing VLANs and Trunks

ICND2

• Course content added to the new version:
• Troubleshooting VLAN connectivity
• Understanding and verifying Cisco Licensing
• Managing Cisco devices
• Understanding and configuring clients for SNMP, Syslog and Netflow
• Understanding and configuring OSPFv3
• Multi-area OSPF IPv4 Implementation
• Implementing EIGRP for IPv6
• Troubleshooting EIGRP
• Implementing EIGRP
• Troubleshooting IPv4 Network Connectivity
• Troubleshooting IPv6 Network Connectivity
• Understand Spanning Tree Protocol
• Understand and configure Etherchannel
• Understand Layer 3 Redundancy Protocols

The CCNA certification exam will test materials from the new Interconnecting Cisco Network Devices (ICND) courses Part 1 100-101 and Part 2 200-101, both included in this training course module.

100-101: ICND Part 1

Module 1

• Understanding Cisco Certification Track
• Cisco Certifications
• What’s New In 100-101
• Study Suggestions
• Numbering Systems
• Creating a Lab Environment
• Review

Module 2

• Networking Technologies
• Network Building Blocks
• Network Cables
• Network Speed
• Review

Module 3

• Open Systems Interconnecting (OSI) Model
• OSI Model Layer Definition
• Network Device Communication Using OSI
• Review

Module 4

• Basic IP Addressing
• IPv4 Addressing
• Subnet Masks
• ARP
• Layer 2 and 3
• Review

Module 5

• IP Addressing Part 2
• Assigning Addresses
• Multiple IP Addressing
• Loopback Addressing
• Classes of Addresses
• Review

Module 6

• Subnetting
• How Subnetting Works
• Determine and Create a Subnet
• Review

Module 7

• More Subnetting
• Determining How Many Subnets Are Needed
• Subnet Masks
• Review

Module 8

• Protocols and Ports
• TCP and UDP
• Industry Standard Ports
• End to End Communication
• Network Analyzation Tool
• Review

Module 9

• Cisco IOS (Internetwork Operating System)
• Hubs
• Switches
• Routers
• Cisco IOS Command Modes
• Review

Module 10

• Using IOS: Base Configuration
• Physical Connections
• Initial Configuration Checklist
• Password Configuration for Secure Connection
• Configuring a Default Gateway
• Login Banners
• Review

Module 11

• VLans and Trunks
• Virtual LAN (VLAN)
• Trunking
• When and Why are They Used
• Review

Module 12

• VTP and 802.1q
• VLAN and Trunking Review
• Native VLAN
• VLAN Trunking Protocol (VTP)
• VLAN Pruning
• Review

Module 13

• Routing Essentials
• What is a Router?
• Basic Router Configuration Using the IOS
• Introduction to Routing Protocols
• OSPF Configuration
• Review

Module 14

• Network Address Translation (NAT)
• What is NAT?
• Configuring NAT on a Router Using IOS
• Review

Module 15

• Static Routes
• What is a Static Route?
• Configure a Static Route Using IOS
• Review

Module 16

• Internet Protocol version 6 (IPv6)
• IPv6 Addresses
• IPv6 Address Types
• Enabling and Configuring IPv6 Using IOS
• Review

Module 17

• Access Control Lists
• Adding and Configuring
• Review
• Course Review

200-101: ICND Part 2

Module 1

• CCNA-ICND2_Introduction
• Cisco Certifications
• What’s New In 200-101

Module 2

• Lab Setup
• Using Graphical Network Simulator (GNS3)
• Review

Module 3

• Spanning Tree Protocol (STP)
• STP Explained
• Important Facts
• Find the Best Path
• STP Functions
• PortFast
• Rapid STP
• Review

Module 4

• First Hop Redundancy Protocols (FHRP)
• What we will cover
• Protocols: FSRP,HSRP,VRRP,GLBP
• Configuring
• Fine Tuning
• Virtual and Gateway
• GLBP?
• Review

Module 5

• Virtual Private Network (VPN)
• Connection Types
• Authentication
• Routing and Remote Access
• IpSec Protocols
• Is VPN Secure?
• Review

Module 6

• Enhanced Interior Gateway Routing Protocol (EIGRP)
• Distance Vector (DV) and Link State Routing Protocol (LSRP)
• Loop Prevention
• Split Horizon
• Why EIGRP?
• How is EIGRP Metric calculated?
• Configure EIGRP
• Review

Module 7

• Open Shortest Path First (OSPF)
• OSPF Areas
• Autonomous System Boundary Router (ASBR)
• OSPF Neighbors
• Synchronisation Process
• OSPF Setup
• Configure OSPF
• Review

Module 8

• IPv6: The New Frontier
• IPV6
• Configure an IPv6 Addressing Scheme
• Review
• ICND2 Program Review

Course Delivery:    Online